MICAWA is a one-piece toilet manufacturer based in Foshan, China, supplying ceramic toilets for distributors, bathroom brands and project buyers. Selected models are available with siphonic flushing, 300 mm and 400 mm rough-in options, with OEM branding and packaging support.
Current product range
Compare MICAWA one-piece toilets by dimensions, rough-in and flushing configuration. Current models are designed for distributor, private-label and project sourcing, with technical specifications available on each product page.
Buyer selection guide
The right model depends on the installation interface, bathroom space, local compliance requirements and your route to market. Use this checklist to shortlist a configuration before requesting samples or a quotation.
| Selection Step | What to Confirm | Why It Matters |
|---|---|---|
| 1. Installation and rough-in | 300 mm or 400 mm floor rough-in; floor outlet or selected wall-outlet configuration | The toilet must align with the finished wall and drainage layout. Confirm the measurement on the project drawing before model approval. |
| 2. Bathroom space | Overall width, depth, height, door clearance and service access | A compact retail model may suit smaller bathrooms, while project bathrooms need consistent dimensions across every room. |
| 3. Flushing system | Siphonic flushing, flush volume, trapway design and inlet components by model | These details affect flushing performance, water use, noise expectations and local market preference. |
| 4. Market compliance | Destination country, water-efficiency rules, certification, labels and installation documentation | Compliance is model- and market-specific and should be confirmed before samples or production are approved. |
| 5. Channel and application | Distributor assortment, showroom display, hotel/apartment schedule or residential development | The best configuration balances appearance, price level, installation repeatability, packaging and replenishment needs. |
| 6. Supply and branding | Estimated quantity, MOQ, sample requirement, logo, packaging and delivery target | These inputs determine whether an existing model, private-label modification or new ODM development is the right route. |
Start with a small, clearly differentiated assortment: confirm the target price tier, the most common rough-in in your market, carton requirements and replacement components. Existing models usually provide the fastest route to launch.
Explore distributor supply support →
Prioritize a repeatable installation specification. Confirm rough-in, outlet, dimensions, flush volume, room quantity, batch consistency, packaging and delivery phases against the project schedule.
See project buyer requirements →
Decide whether you need an existing model with logo and packaging customization or a new design. Share your target market, technical brief and forecast quantity so engineering feasibility, tooling and MOQ can be reviewed early.
Explore private-label support →Manufacturing & technical advantages
From ceramic forming and high-temperature firing to flushing validation and packing, MICAWA aligns the production process with the technical details that matter to distributors, brands and project buyers.
Existing models help distributors and retailers launch faster, while consistent moulds, specifications and packaging support replenishment without unnecessary model variation.
As part of a wider bathroom manufacturing system, MICAWA can coordinate one-piece toilets with other sanitary ware, furniture and fitting requirements when a project needs a broader supply scope.
Specifications and test results vary by model. Buyers should confirm the current technical sheet, installation drawing, water-use data and required components before sample or production approval.
Manufacturing details, available configurations and test results are model-specific. Request the latest technical documents for your target market and order.
Quality control & testing
A certificate alone does not determine whether a toilet is right for a market or project. MICAWA aligns the quality plan with the exact model, technical specification, application and destination requirements.
Sanitary-ware checks can include water retention, leakage, flushing performance, dimensions and appearance review. Test conditions and acceptance criteria are confirmed for the selected model and market.
Surfaces are reviewed for glaze coverage, colour consistency, pinholes, cracks, deformation and other visible defects before approved products move to packing.
Model labels, accessories, cartons, protective materials and packing quantities are checked against the approved order before shipment preparation.
The exact inspection plan is agreed according to product and order requirements. Buyers can provide their own acceptance criteria or arrange third-party inspection before production is released.
Confirm model, drawings, market standards, appearance criteria and application.
Review dimensions, installation interfaces, flushing behaviour, finish and components.
Monitor forming, firing, glazing and assembly before final packing.
Check finished quality, accessories, labels and carton protection.
Provide agreed quality information and prepare the confirmed quantity for delivery.
Wholesale, project supply & OEM
MICAWA supports factory-direct supply for importers, distributors, bathroom brands and project buyers. The commercial route is confirmed by model, quantity, destination market, packaging and customization scope.
| MOQ | Company-supplied reference is 100 sets; confirm whether the requirement is per model, finish or total order. |
|---|---|
| Sample | Available for selected models. Confirm sample cost, configuration and destination shipping before approval. |
| Packaging | Cartons and wooden-frame protection can be discussed according to model, loading plan and project handling requirements. |
| Technical documents | Request the current specification sheet, dimensions, installation drawing, component list and applicable quality documents for the selected model. |
| Lead time & delivery | Confirmed after model, quantity, packaging, inspection requirements and delivery destination are finalized. |
OEM / ODM route
Choose the shortest route that matches your product ambition. Existing models are suitable for faster launch; new ceramic development requires an engineering review, sampling and tooling discussion.
Send target market, application, quantity, rough-in, certification and delivery requirements.
Match dimensions, outlet, flushing configuration, price tier and packaging to the programme.
Confirm appearance, installation fit, components, documents and any private-label details.
Lock the approved specification, inspection plan, packaging and order quantity.
Complete agreed checks, prepare cartons and coordinate shipment documentation.
Relevant projects
Project references help buyers understand how product coordination, repeatable specifications and delivery planning work beyond a single model. Explore documented MICAWA project cases below.
Sanitary ware coordination for a landmark venue with high visitor flows and repeated public washroom areas.
Read the National Stadium case →
Bathroom products coordinated for long operating hours, controlled-access zones and infrastructure project delivery.
Read the Daxing Airport case →
Hospitality bathroom coordination balancing brand design review, repeatable quality and operational requirements.
Read the Marriott Hotel case →Buying guides
Practical guides for confirming one-piece toilet specifications, private-label options and what to include when you request a quotation.
Buyer questions
Answers focused on actual sourcing and search questions rather than consumer maintenance topics.
A one-piece toilet integrates the tank and bowl into a single ceramic body. Compared with a two-piece toilet, it has fewer external joints and is commonly used in residential, hospitality and distribution programs.
Selected MICAWA one-piece toilet models support 300 mm and 400 mm rough-in configurations. Final compatibility should be confirmed against the selected model and the project drainage layout.
MICAWA's current one-piece toilet range includes siphonic flushing models. Flush volume, trapway design and flushing components vary by model and should be confirmed against the current technical sheet.
Sample availability depends on the selected model. Contact MICAWA with the model, destination country and quantity requirement to confirm sample availability and shipping.
Certification availability varies by model and destination market. Buyers should provide the target country and required standard before product approval.
Yes. MICAWA reviews model selection, logo, carton, labels, manuals and selected technical configurations for private-label programs. New ceramic product development is subject to a separate engineering review.
MOQ is confirmed by model, configuration and packaging requirement. Submit the target model and estimated quantity for confirmation.
Provide the target model or preferred style, destination market, estimated quantity, rough-in, certification requirements and whether OEM branding or customized packaging is required.
B2B RFQ
Tell us your target market, preferred model, quantity and installation requirements so the quotation can be matched to the correct configuration.
Send us your target market, rough-in and expected order quantity. Our team can help shortlist suitable models for your sourcing program.
Request Model Recommendations →We use only necessary browser storage to remember privacy preferences and support core site functions.
