High-Temperature Vitrified Ceramic
High-pressure casting and an 18-hour firing cycle at 1,280°C create a dense, fully vitrified ceramic body for demanding commercial environments.
1,280°C Firing18-Hour Firing CycleHigh-Pressure Casting
Urinal Manufacturer
Wall-hung and sensor ceramic urinals for commercial and public washrooms. One-piece and smart toilets remain on the toilet category page.
Current ceramic urinal models
Browse wall-hung urinals, including sensor-flush models. Dimensions and installation information are shown where provided.
Wall-Hung Urinal
MN-6802
770 × 365 × 380 mm
View product details →
Sensor Wall-Hung Urinal
MN-6805G
830 × 490 × 368 mm
View product details →
Sensor Wall-Hung Urinal
MN-6823G
340 × 295 × 680 mm
View product details →
Sensor Wall-Hung Urinal
MN-6827G
360 × 380 × 760 mm
View product details →
Sensor Wall-Hung Urinal
MN-6828G
340 × 380 × 710 mm
View product details →Commercial Urinals Engineered for Hygiene and Water Efficiency
MICAWA commercial urinals combine vitrified ceramic construction, easy-clean glazing, low-volume flushing and flexible installation options for high-traffic washrooms.
Antibacterial Easy-Clean Surface
A secondary high-temperature glazing process creates a smooth microcrystalline surface with water absorption of no more than 0.5%.
Microcrystalline Glaze≤0.5% Water AbsorptionEasy-Clean Surface
Ultra-Low Water Consumption
Selected urinal configurations use as little as 0.5 litres per flush, helping reduce water consumption by up to 62.5% under the relevant comparison conditions.
As Low as 0.5 L per FlushUp to 62.5% Water Savings
Efficient Inner-Wall Rinsing
Engineered water distribution covers up to 96% of the inner wall, while a waste outlet of at least 19 mm supports dependable drainage.
96% Inner-Wall Coverage≥19 mm Waste Outlet
Durable Ceramic Construction
The ceramic body achieves a flexural failure load of at least 0.22 kN, supporting stable performance in commercial washroom applications.
≥0.22 kN Flexural Failure LoadFully Vitrified Ceramic
Flexible Installation and Flush Control
Depending on the selected model and project configuration, options include top or rear water inlets, wall or floor drainage, and sensor, manual or foot-operated flushing.
Top / Rear InletWall / Floor DrainageSensor / Manual / Foot Control
Ceramic urinals from the same sanitary-ware system
MICAWA produces ceramic urinals in the same sanitary-ceramic system used for toilets and basins: raw-material processing, forming, glazing, firing, grading, inspection, packaging and warehousing.
The company-reported sanitary ceramic capacity is 600,000 pieces per year. Model-level inlet, drainage and flush-control options are confirmed against the project brief.
- 200,000 m²
- Current company-reported manufacturing base
- 2 × 123 m
- Automatic ceramic tunnel kilns
- 1,280°C / 18 h
- Controlled ceramic firing cycle
- 600,000 pcs/year
- Sanitary ceramic capacity
Urinals for commercial and public washrooms
Use the project route that matches the washroom type, then confirm inlet, drainage and control details before quotation.
Hotel & commercial washrooms
Coordinate urinals with toilets and basins for public washroom zones in hotels and commercial buildings.
Hotel & commercial washroomsPublic & engineering washrooms
Prepare quantities, spacing and installation inputs for high-traffic public and engineering facilities.
Public engineering washroomsSanitary ware range
Return to toilets, urinals and ceramic basins when the RFQ covers more than one sanitary-ceramic family.
Sanitary ware overviewUrinal sourcing questions
Questions specific to commercial urinal inlet, drainage and flush-control decisions.
What urinal products does MICAWA currently supply?
The current public range includes wall-hung ceramic urinals, including models with integrated sensor flushing. Model availability, dimensions and installation drawings are confirmed through inquiry.
What information is needed for a urinal quotation?
Share the washroom type, expected quantity, inlet and drainage positions, flush-control preference, power conditions where applicable, destination market and any branding or packaging needs.
Are these urinals for residential bathrooms?
The listed urinals are intended for commercial and public washrooms. Guest-room and residential toilet programs should start with the toilet category covering one-piece and smart toilets.
When should urinals be scheduled separately from toilets and basins?
Use a separate urinal schedule when inlet, drainage, sensor control, partitions, power or public-washroom quantities need their own approval and delivery tracking.
Which urinal features require project-specific feasibility review?
Review inlet and drainage positions, flush-control method, sensor power, fixing conditions, spacing, documentation and any non-standard finish or branding requirement.
Tell us the washroom layout for your urinal program
Send inlet and drainage positions, flush-control preference, quantity, destination market and any sensor power conditions. MICAWA will confirm current models and the next evaluation step.
Inlet · Drainage · Flush control · Quantity · Target market